Wacker Neuson BS 50-4s, BS 50-4As, Repair Manual

Page: 134 / 194

wc_tx004029gb_FM10.fm
134
Rammer Disassembly and Reassembly
4.37 Removing the Clutch Drum
Requirements
■
Upper machinery removed
■
Engine removed
■
Hydraulic press
■
Slide hammer
■
Engine removed
Procedure Perform the procedure below to remove the clutch drum.
1. Remove the upper machinery. See topic Removing the Upper Machiner y.
2. Remove the engine. See topic Removing the Engine .
Note: The front cover cannot be removed until the connecting rod is disconnected
from the ram.
3. Remove the four screws (g) from the front cover.
4. Insert a screwdriver into the slots on each side of the front cover (h) and pry off
the front cover. The front cover will come off with the crank gear and connecting
rod
(j) attached.
This procedure continues on the next page.
To view an animation of this procedure, internet access
is needed.
To view the animation, click on the video icon or scan
the QR code with a smart phone.
g
wc_gr012868 wc_gr012869
h
j