Wacker Neuson BS 50-4s, BS 50-4As, Repair Manual

Page: 155 / 194

wc_tx004029gb_FM10.fm
155
Rammer Disassembly and Reassembly
4.44 Installing the Spring System Cover—Spring Box Tool
Requirements
■
Spring box tool P/N 5000081423
■
Loctite® 243
■
New gasket
Background There are two methods for installing the spring system cover: The preferred
method is using the special spring box tool P/N 5000081423. For those who don't
have the special tool, the hydraulic press method used.
Procedure Perform the procedure below to install the spring system cover.
This procedure continues on the next page.
WARNING
Personal injury hazard. The spring system cover is under high pressure. If the
spring system cover is removed incorrectly, the springs can eject with enough force
to cause serious injury or death!
►
Only remove the spring system cover using the hydraulic press or spring box
tool method.
To view an animation of this procedure, internet access
is needed.
To view the animation, click on the video icon or scan
the QR code with a smart phone.