Page 4 of 58
POS-123-*-2030
1 General Information
1.1 Order number
POS-123-U
1
-2030
2
- with programmable output (±10 V differential output
or 4… 20 mA) and analogue
sensor interface
POS-123-P-2030
- with integrated power output stage up to 2,6 A (
see additional information
)
POS-123-U-SSI-2030
- with programmable output (±10 V differential output
or 4… 20 mA), SSI sensor
interface and 0… 10 V output as a diagnosis signal for the SSI sensor
(
see additional information
)
Extended versions
PPC-125-U-PDP
- with extended position and pressure control, SSI or analogue sensor interface and
Profibus interface
UHC-126-U-ETC
- with extended position and pressure control, SSI or analogue sensor interface and
Ethernet interface
(Ethercat, Profinet, …)
1.2 Scope of supply
The scope of supply includes the module plus the terminal blocks which are part of the housing.
The Profibus plug, interface cables and further parts which may be required should be ordered separately.
This documentation can be downloaded as a PDF file from
www.w-e-st.de
.
1.3 Accessories
WPC-300
- Start-Up-Tool (downloadable from our homepage
– products/software)
1
Compared with older versions (ordering code
A
for voltages output and
I
for current output) the code
U
(universal) is
used for programmable outputs.
2
The number of the version consists of the hardware version (first two digits) and the software version (last two digits).
Because of the development of the products these numbers can vary. They are not strictly necessary for the order. We will
always deliver the newest version.
