Page 26 of 58
POS-123-*-2030
5.3.5
Using of the commands SYS_RANGE, N_RANGE:X and OFFSET:X
The application scaling will be done by these three commands. In this example the system is defined by a
length of 120 mm of the sensor, a working stroke of 100 mm of the cylinder and an offset of 5 mm. These pa-
rameters have to be typed in and the axis is driving between 5 mm and 105 mm of the sensor stroke and be-
tween 0 mm and 100 mm of the cylinder stroke.
Correct scaling:
SYS_RANGE = 100 (mm)
N_RANGE:X
= 120 (mm)
OFFSET:X
= -5000 (µm)
120,00 mm
100,00 mm
5,00 mm
Figure 1 (Input scaling of the sensor)
