Page 25 of 58
POS-123-*-2030
5.3.3
N_RANGE:X (Nominal range of the sensor)
Command
Parameter
Unit
Group
N_RANGE:X x
x= 10… 10000
mm
EASY
N_RANGE (nominal range or nominal stroke) is used to define the length of the sensor. This value should be
always higher than SYS_RANGE. The control parameter cannot be calculated correctly in case of wrong val-
ues.
5.3.4
OFFSET:X (Sensor offset)
Command
Parameter
Unit
Group
OFFSET:X x
x= -100000… 100000 µm
EASY
Adjustment of the zero point of the sensor.
