Chapter 2. Configuring AppsView
HS 2000 System Administrator’s Handbook
32
Setting communications parameters
Adding or customizing a profile for your site
The default settings for the profiles listed in the Communications window
may not match the requirements for your system’s hardware or its
connection types.
To set up a custom profile for your system, follow these steps:
1
From the Configuration window, select the Communications tab.
2
If the settings for a profile in the Profiles list match many
(but not all) of the settings required by your system,
select the profile, then press Copy.
If you cannot find a profile in the Profiles list with settings that
closely match the settings required by your system, select Add.
3
Enter the name of your new profile.
4
Highlight the name of the new profile in the Profiles list.
5
Press the Properties button.
6
Select options in the Protocols window, as described in the table
on page 27.
