Chapter 2. Configuring AppsView
HS 2000 System Administrator’s Handbook
20
Hardware and ISDN interface connections
1
Use the Windows 95 Add New Hardware Wizard to set up the new
hardware in Windows, as described in this step.
■
Click the Windows 95 Start button.
■
Select Settings, then select Control Panel.
■
Open the System window, then select the
Device Manager tab.
■
Select Other Devices, then select VTEL as the manufacturer.
■
Select the hardware that matches the board you are installing.
2
If the wizard detects a resource usage conflict between existing
hardware and the new hardware, select Continue to run the Hardware
Conflict Troubleshooter.
You may need to change settings for the existing hardware or for the
new hardware, or make additional resources available.
It is likely that you will need to change IRQ settings to allow for the
new hardware. If the system does not need to use a printer port,
disable LPT1, which frees IRQ 7 for use. If the system does not use a
secondary IDE controller, disable it, which makes IRQ 15 available.
You do not need to
perform this step
if you are installing
plug-and-play or
PCI boards, including
VTEL TC video boards,
VTEL TC codec boards,
and the standard
configuration VTEL
Teleconferencing Network
Adapter board.
You do not need to
perform this step
if you are installing
plug-and-play or
PCI boards, including
VTEL TC video boards,
VTEL TC codec boards,
and the standard
configuration VTEL
Teleconferencing Network
Adapter board.
