Vorwerk KOBOLD VF200, Instruction Manual, Page: 83 / 109

83 Maintenance
CLEANING THE MATTRESS VACUUMER MR440
Lavenia may get stuck between the rubber beater bars of the Mattress Vacuumer.
• Vacuum up Lavenia residue with the Electric Suction Hose, Flexo Nozzle or
Soft Nozzle. Never wet clean the entire device.
If it is very dirty, you can remove the beater unit from the Mattress Vacuumer for
separate wet cleaning:
• Attach the Mattress Vacuumer to the Electric Upholstery Brush (l.).
• Remove the vibrating bars by first pulling one side and then the other side
of the holders outwards (II.).
• Clean the vibrating bars under running water (III.).
4.6 Additional accessories
This chapter applies to the following accessories:
- Kobold VD15 Variable Nozzle
- Kobold FD15 Flexo Nozzle
- Kobold SD15 Soft Nozzle
• The accessory heads can be rinsed off under running water.
• Allow the accessory heads to dry off before reusing them.
• Clean the bristles of the Soft Nozzle with soap and lukewarm water.
3
1
2
4
II.
I
.
III.
Fig. 4.19 Removing the vibrating bars