Vorwerk KOBOLD VF200, Instruction Manual, Page: 38 / 109

38 Operation
KOBOSAN ACTIVE DOSAGE
• Operate Kobosan active dosage with the foot switch .
- Switch up: Kobosan active dosage = deactivated .
- Switch down: Kobosan active dosage = activated .
• Set the Upright Vacuum Cleaner to power performance level auto.
The suction motor starts and drives the brush of the Carpet Freshener.
Kobosan active is brushed directly into the carpet.
• Move the Carpet Freshener back and forth in adjacent passes.
• For a normal level of dirt you optimally cover the area of the carpet with
Kobosan cleaning agent by travelling over it once.
• After one pass over the area being cleaned, deactivate the dosage container by
pressing the foot switch .
The dosage container does not have to be deactivated if it is empty.
WORK IN KOBOSAN ACTIVE
• Make sure that the dosage container is deactivated .
• Then run the Carpet Freshener over the area covered with Kobosan active at
right angles to the previous working direction.
• Depending on the degree of dirt, work in the Kobosan active for up to three
minutes per square metre in all four directions.
• Then open the windows and allow it to dry. Depending on the type of carpet
and room temperature, drying should not take more than 30 minutes.
Fig. 3.11 Kobosan active dosage
activation/deactivation
VF200
1
2
3