Vorwerk KOBOLD VF200, Instruction Manual, Page: 75 / 109

75 Maintenance
INSERTING THE MOTOR PROTECTION FILTER
• Position the motor protection filter behind the rib .
• Swing the filter up until it engages in the retainer .
• Close the filter unit.
Note! Risk of damage from improper use!
• Use the Kobold VK200 Upright Vacuum Cleaner only with the motor
protection filter inserted.
4.2.3 Removing the power cord from the Kobold VK200 Upright
Vacuum Cleaner
The power cord is designed to remain permanently connected to the device once
it has been installed. However, you can remove the power cord if it is damaged
and has to be exchanged.
Warning! Risk of electric shock!
• Disconnect the plug from the mains socket before removing the power
cord.
• Release the plug from the Upright Vacuum Cleaner.
You can release the plug by pushing it up in the cable channel using the sup-
plied yellow collar . The collar is included with the replacement power cord.
• Thread the plug through the cable channel up and out of the handle grip .
• Dispose of the damaged power cord and insert a new, original Vorwerk power
cord as described in chapter “2.2 Power cord” on page 15.
3
1
2
Fig. 4.7 Inserting the motor protection
filter
2
3
1
Fig. 4.8 Removing the power cord