Vorwerk KOBOLD VF200, Instruction Manual, Page: 77 / 109

77 Maintenance
CLEANING THE ROLLER BRUSH
Note! Risk of damage to the device due to improper cleaning!
• Never wet clean the roller brush. The roller brush is not dishwasher
safe nor waterproof.
• Remove lint, hair and other dirt from the roller brush.
• Hair can be cut with scissors along the slots .
• Make sure that the green cap and the metal cup and ball bearing of the
roller brush underneath the cap are not loosened.
REINSTALLING THE ROLLER BRUSH
• Set the brush with the black side onto the TORX® cam . The green side is
inserted on the opposite side .
• Place the floor plate under the green sealing lip and swivel it round to
the middle of the device, until both locking bolts audibly lock.
Note! Risk of damage from improper use!
• If the green cap has been removed, ensure that the small metal bearing
ball fits correctly. Otherwise the bearing may be damaged.
Roller brushes can be purchased from the Mail Order Hotline (see chapter
“8 Services” on page 99).
1
2
Fig. 4.10 Cleaning the roller brush
2
3
1
Fig. 4.11 Inserting the roller brush
6
4
5
Fig. 4.12 Swivel in floor plate