Vorwerk KOBOLD VF200, Instruction Manual, Page: 32 / 109

32 Operation
SWITCHING FLEX/FINE
- Flex setting: Your Automatic Electric Brush is perfectly pre-set with the flex
setting for everyday vacuuming.
- Fine setting: You can adjust the Automatic Electric Brush specifically when
vacuuming fine dust from joints and cracks. You will obtain maximum dust
collection, for instance from a wooden floor with lots of joints, with the fine
setting.
Caution! Risk of injury due to the rotating brush!
• Always switch off the Kobold VK200 Upright Vacuum Cleaner with the
main switch before changing the setting on the bottom of the Kobold
EB400 Automatic Electric Brush.
• Switch off the Upright Vacuum Cleaner with the main switch.
The Automatic Electric Brush automatically defaults back to carpet mode.
• Push the slider on the underside of the device to the position (fine) for
fine dust in joints or the position (flex) for picking up coarse material on
smooth floors.
We recommend the flex setting for normal work. Only select the fine
setting for floors with large joints or cracks, such as wooden plank floors.
When the Kobold EB400 Automatic Electric Brush is in hard floor mode,
the slider cannot be operated. In this case, switch the Kobold VK200
Upright Vacuum Cleaner off and back on again using the main switch to
set the Kobold EB400 Automatic Electric Brush to carpet mode.
Fig. 3.5 Switching flex/fine
2
3
1