manualshive.com logo in svg

Vorwerk KOBOLD VF200, Instruction Manual, Page: 74 / 109

Share
Download
Vorwerk KOBOLD VF200 Instruction Manual Download Page 74

74

Maintenance

REMOVING THE MOTOR PROTECTION FILTER

The motor protection filter   is held in two places in the filter compartment of 
the Upright Vacuum Cleaner   and  .

• 

Grasp the flap   and push it down while pulling the flap towards yourself at 
the same time.

The locking mechanism disengages and the filter can be removed.

CLEANING THE KOBOLD MOTOR PROTECTION FILTER

 

Note! Risk of damage from improper use!

•  Do not clean the motor protection filter with water or other fluids. 

• 

Vacuum the motor protection filter from both sides.

EXCHANGING THE MOTOR PROTECTION FILTER

• 

If the motor protection filter has been damaged or is extremely dirty, insert a 
new one.  

  The Motor protection filter can be purchased from the Mail Order Hotline 

(see chapter “8 Services” on page 99).

  Motor protection filters can also be obtained at our online shop 

at www.vorwerk.co.uk

2

2

1

3

Fig. 4.6  Removing the motor protection 

filter

Summary of Contents for KOBOLD VF200














































































































Reviews:

No comments