Vorwerk KOBOLD VF200, Instruction Manual, Page: 76 / 109

76 Maintenance
4.3 Kobold EB400 Automatic Electric Brush
Warning! Risk of electric shock!
• Always switch the device off before all retrofitting, cleaning and main-
tenance work and disconnect the mains plug from the socket.
Caution! Pinching hazard!
• Stay clear of the moveable parts of the Kobold EB400 Automatic
Electric Brush.
4.3.1 Checking and cleaning
• Check the under side every once in a while to prevent damage to the device
and floor.
• Perform visual inspections from time to time in order to detect defects or very
dirty areas.
• A dirty sensor can simply be vacuumed. Do not insert any sharp objects
into the sensor shaft.
4.3.2 Taking out the brush to clean or exchange it
REMOVING THE ROLLER BRUSH
• Set the Automatic Electric Brush upside down.
• Unlock the floor plate by pressing the locks on both sides at the same
time with your hands.
• Take off the floor plate .
• First lift the green side of the roller brush out of the Automatic Electric
Brush and then pull the black side off the axle.
1
1
2
3
5
4
Fig. 4.9 Removing the roller brush