
46
Operation
SWITCHING ON
To switch on the DuoClean, the Upright Vacuum Cleaner must be switched on
first:
•
Switch the vacuum cleaner to the power performance level auto.
The LED display marked with “ON” on the DuoClean will light up green, and
the DuoClean will be ready to operate.
•
Set the Upright Vacuum Cleaner to the power setting.
•
Now, close the secondary air flap on the DuoClean.
The DuoClean will start when the flap has been closed.
SWITCHING OFF THE DEVICE
To switch off the Kobold SP530 DuoClean, the Upright Vacuum Cleaner has to be
switched off:
•
Switch off the Upright Vacuum Cleaner.
The secondary air flap will open automatically.
The secondary air flap will remain open when the Upright Vacuum Cleaner is
switched off.
If you want to put down the DuoClean for a short period of time only (less than
30 seconds), it is sufficient to put the Upright Vacuum Cleaner in the standby
position.
•
Put the Upright Vacuum Cleaner in the standby position (see chapter
“2.5 Standby position and power setting” on page 19) and leave the Upright
Vacuum Cleaner switched on.
The DuoClean will switch off automatically.
•
Set the Upright Vacuum Cleaner back to the power setting.
The DuoClean will be switched on automatically.
1
2
3
Fig. 3.18 Switching on the DuoClean
1
Fig. 3.19 Switching off the DuoClean
Summary of Contents for KOBOLD VF200
Page 1: ...INSTRUCTION MANUAL KOBOLDVK200 UPRIGHTVACUUM CLEANER AND ACCESSORIES...
Page 106: ...106 EU energy label classification...
Page 107: ......
Page 108: ......