42-38
Loosen and tighten only when vehicle is standing on
its wheels (danger of accident).
Tightening torque: 90 Nm (66 ft lb) and turn 45
further (
1
/
8
turn)
Note:
Any paint residue and/or corrosion on the thread of
the outer joint must be removed before the nut is
installed.
Fig. 3
Drive shaft, removing and installing
Tightening torque -A- and -B-: 25 Nm (18 ft lb)
Fig. 4
Stabilizer bar, removing and installing
Page 6 of 13
Rear axle, servicing (four wheel drive vehicles)
12/7/2004
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.42.3
