Chapter 11 DHCP Server
EMG2926-Q10A User’s Guide
103
11.3 DHCP Server Advanced Screen
This screen allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC addresses. You can also use this screen to configure the DNS server information that the
EMG2926-Q10A sends to DHCP clients.
To change your EMG2926-Q10A’s static DHCP settings, click
Network
>
DHCP Server
>
Advanced
. The following screen will appear:
Figure 72
Network > DHCP Server > Advanced
The following table describes the labels on this screen.
Lease Time
Specify how long each computer can use the IP address before it has to request the
information again.
Apply
Click
Apply
to save your changes to the EMG2926-Q10A.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 47
Network > DHCP Server > General (continued)
LABEL
DESCRIPTION
Table 48
Network > DHCP Server > Advanced
LABEL
DESCRIPTION
Static DHCP Table
#
This is the static IP table entry (row)’s index number.
