EMG2926-Q10A User’s Guide
18
C
HAPTER
2
Introducing the Web Configurator
2.1 Overview
This chapter describes how to access the EMG2926-Q10A Web Configurator and provides an
overview of its screens.
The Web Configurator is an HTML-based management interface that allows for easy setup and
management of the EMG2926-Q10A via an Internet browser. Use Internet Explorer 9.0 and later
versions, Mozilla Firefox 21 and later versions, Safari 6.0 and later versions or Google Chrome 26.0
and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• web browser pop-up windows on your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2;
• JavaScript (enabled by default);
• Java permissions (enabled by default).
2.2 Accessing the Web Configurator
1
Make sure your EMG2926-Q10A hardware is properly connected and prepare your computer or
computer network to connect to the EMG2926-Q10A (refer to the Quick Start Guide).
2
Launch your web browser.
3
The EMG2926-Q10A is in router mode by default. Type "http://192.168.0.1" as the website
address.
If the EMG2926-Q10A is in access point mode, the IP address is 192.168.0.2.
Your computer must be in the same subnet in order to access this website address.
2.2.1 Login Screen
The Web Configurator initially displays the login screen below.
