Chapter 9 Wireless LAN
EMG2926-Q10A User’s Guide
88
9.5 MAC Filter Screen
The MAC filter screen allows you to configure the EMG2926-Q10A to give exclusive access to
devices (
Allow
) or exclude devices from accessing the EMG2926-Q10A (
Deny
). Every Ethernet
device has a unique MAC (Media Access Control) address. The MAC address is assigned at the
factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You
need to know the device’s MAC address to configure this screen.
To change your EMG2926-Q10A’s MAC filter settings, click
Network
>
Wireless LAN 2.4G/5G
>
MAC Filter
. The following screen will appear.
Figure 56
Network > Wireless LAN 2.4G/5G > MAC Filter
Security Mode
Note: If the WPS function is enabled (default), only
No Security
and
WPA2-PSK
are
available in this field.
Select
Static WEP
,
WPA-PSK
,
WPA
,
WPA2-PSK
or
WPA2
to add security on this
wireless network. Wireless clients that want to connect to this network must have the
same wireless security settings as this device. After you select a security mode,
additional options will appear in this screen. See
for detailed
information on different security modes. Alternatively, select
No Security
to allow any
client to associate with this network without authentication.
Apply
Click
Apply
to save your changes to the EMG2926-Q10A.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
Table 35
Network > Wireless LAN 2.4G/5G > More AP: Edit (continued)
LABEL
DESCRIPTION
