Chapter 7 Monitor
EMG2926-Q10A User’s Guide
64
7.2.2 Log Setting
You can configure which logs you want to display on the
View Log
screen. Go to the
Log Setting
screen and select the logs you wish to display. Click
Apply
to save your settings. Click
Cancel
to
start afresh.
Figure 37
Log Setting
7.3 DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the EMG2926-Q10A’s LAN
as a DHCP server or disable it. When configured as a server, the EMG2926-Q10A provides TCP/IP
configuration for clients. If DHCP service is disabled, you must have another DHCP server on that
network, or else the computer must be manually configured.
Go to
Monitor > DHCP Table
or
Configuration > Network > DHCP Server > Client List
. This
read-only information relates to your DHCP status. The DHCP table shows current DHCP client
information (including
MAC Address
and
IP Address
) for all network clients that are using the
EMG2926-Q10A’s DHCP server.
Figure 38
Monitor > DHCP Table
