VideoIQ User Guide
75
On certain cameras you may also need to use the
Focus In/Focus Out
and
Iris
Open/Iris Close
buttons to operate the on-screen menu. Refer to your PTZ
camera manual to see what additional steps are needed.
Configuring Input/Output Settings
The
Input/Output Settings
window lets you configure settings for alarm inputs
and outputs attached to your camera. Changing the settings on this page
1. When the Configure Camera window opens, click
Input/Output
.
2. Use the Alarm Input option buttons to specify if the input device signal is
Normally Open (high)
or
Normally Closed (low)
.
a. Change the name of the input field label by entering up to eight
characters in the
Name
field; then click
Apply
. The changed label name
displays in the Alarm I/O toolbar on the camera web page.
3. Use the Alarm Output options button to specify if you want the alarm output of
the iCVR to be
Normally Open
or
Normally Closed
.
a. Use the
Following
button to specify if you want the output device to be
triggered for the duration of the rule violation.
b. Use
Momentary
to specify if the output device should be triggered for a
fixed amount of time. Enter the desired number of seconds in the
Duration
field.
4. To enable the
Output
button on a live video or alarm review window, check
Allow operator to manually activate alarm output
, This also enables the
Output
button on the Alarm I/O toolbar when accessing a camera via a web
browser.
a. Change the name of this button by entering up to eight characters in the
Name
field; then click
Apply
.
5. Click
OK
.
Summary of Contents for ICVR
Page 1: ...VideoIQ User Guide Release 3 0 ...
Page 5: ......
