VideoIQ ICVR User Manual Download Page 2

Page: 2 / 170

This document may not be copied or otherwise reproduced, in whole or in part, except as

specifically permitted under US and international copyright law, without the prior written

consent from VideoIQ.

Document: 1049107 Revision C (April 2009).

Disclaimer

THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. VIDEOIQ

ASSUMES NO RESPONSIBILITY FOR INACCURACIES OR OMISSIONS AND SPECIFICALLY

DISCLAIMS ANY LIABILITIES, LOSSES, OR RISKS, PERSONAL OR OTHERWISE, INCURRED AS A

CONSEQUENCE, DIRECTLY OR INDIRECTLY, OF THE USE OR APPLICATION OF ANY OF THE

CONTENTS OF THIS DOCUMENT. FOR THE LATEST DOCUMENTATION, CONTACT YOUR LOCAL

SUPPLIER OR VISIT US ONLINE AT WWW.VIDEOIQ.NET.

This publication may contain examples of screen captures and reports used in daily

operations. Examples may include fictitious names of individuals and companies. Any

similarity to names and addresses of actual businesses or persons is entirely coincidental.

Software license

agreement

IMPORTANT: THIS END-USER LICENSE AGREEMENT (“AGREEMENT”) IS A LEGAL AGREEMENT

BETWEEN VIDEOIQ AND YOU. READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY

BEFORE INSTALLING OR USING THIS SOFTWARE. THIS AGREEMENT PROVIDES A LICENSE

FROM VIDEOIQ TO USE THE SOFTWARE. IT ALSO CONTAINS WARRANTY INFORMATION,

DISCLAIMERS, AND LIABILITY LIMITATIONS. INSTALLING AND/OR USING THE SOFTWARE

CONFIRMS YOUR AGREEMENT TO BE BOUND BY THESE TERMS AND CONDITIONS. IF YOU DO

NOT AGREE WITH THESE TERMS AND CONDITIONS, DO NOT INSTALL OR USE THE SOFTWARE

OR, IF ALREADY INSTALLED, IMMEDIATELY CEASE ALL USE OF THE SOFTWARE AND

PROMPTLY UNINSTALL ALL COMPONENTS OF THE SOFTWARE.

1. License. In this Agreement, you, the purchaser of the rights granted by this Agreement, are

referred to as You or Your, whether an individual or a business entity of any kind. Subject to

the terms and conditions of this Agreement, VideoIQ Inc., a Delaware corporation, (“VIDEOIQ”)

grants You a nonexclusive license to use the accompanying software (including any upgrades,

modified versions, updates, additions and copies of the software furnished to You during the

term of the Agreement) (“Software”), and all associated media, printed materials, and

electronic documentation accompanying the Software (“Documentation”). In this Agreement,

the Software and Documentation are referred to as the Licensed Product.

All rights to and in the Licensed Product, including, but not limited to, copyrights, patents,

trademarks, and trade secrets, belong to VIDEOIQ, and VIDEOIQ retains title to each copy of

the Software. Your license to the software is for use with VideoIQ equipment. You may install

the Software on as many PC clients as necessary solely to manage and use your VideoIQ

equipment. You may not transfer or distribute the Licensed Product to others, in electronic

format or otherwise, for any other use, and this Agreement shall automatically terminate in

the event of such a transfer or distribution. You may not sell, rent, lease, or sublicense the

Software. You may copy the Licensed Product for backup purposes.

2. Term. This Agreement is effective until terminated. You may terminate this Agreement by

uninstalling all components of the Software and returning the Licensed Product to VIDEOIQ.

VIDEOIQ may terminate this Agreement if You breach any of these terms and conditions. Upon

termination of this Agreement by VIDEOIQ, You agree to immediately uninstall all components

of the Software and either destroy or return the Licensed Product to VIDEOIQ. All provisions of

this Agreement relating to (i) disclaimer of warranties; (ii) limitations on liability, remedies,

and damages; and (iii) VIDEOIQ’s proprietary rights, shall survive termination of this

Agreement..

3. Object code. The Software is delivered in object code only. You may not alter, merge,

modify, adapt, or translate the Software, nor decompile, disassemble, reverse engineer, or

otherwise reduce the Software to a human-perceivable form, in whole or in part, nor create

derivative works or programs based on the Software. The Software shall only be used with the

equipment specified by VIDEOIQ..

Summary of Contents for ICVR











































































































































































Search results

Summary of Contents for ICVR

Reviews:

Related manuals for ICVR

Brands by name

Popular brands

VideoIQ ICVR, User Manual

Search results

Summary of Contents for ICVR

Reviews:

Related manuals for ICVR

Brands by name

Popular brands