Viewing Live Video
90
Using Zoom
Use the zoom controls to quickly zoom in or out on an object or area in a camera
window.
Note:
The zoom functionality described in this section takes place on the View
software. If you have View looking at an encoder connected to a PTZ
camera, the zoom functionality is done on the camera.
To view the zoom controls move your cursor over the camera window.
There are three different ways to zoom in on an object or area:
Pressing and holding the
Zoom In
control.
Double-clicking your mouse in the camera window. This zooms the
camera image by 2X and centers the image at the point of the double-
click.
Using the wheel control on your mouse.
Zoom out by pressing and holding the
Zoom Out
control.
Return the camera to its original magnification by clicking the
Home
button.
When the camera is in zoom mode you can change the focus of the video
displaying in the camera window by clicking and dragging the image in the
window. To do this:
1. Move your cursor over the camera window. The cursor changes to an open
hand.
2. Click the left mouse control and drag the image to the desired location. The
cursor changes to a closed hand until you release the mouse control.
When a camera window is in zoom mode you can point the zoomed area in the
window by executing a single mouse click within the window. This will center the
point of view at the location where the mouse was clicked. This same action can
be performed in the Full Scene window, described in the next section.
Summary of Contents for ICVR
Page 1: ...VideoIQ User Guide Release 3 0 ...
Page 5: ......
