VideoIQ ICVR User Manual Download Page 122

Page: 122 / 170

This chapter describes:



Building a Video Search



Searching for a Specific Object

You can search for people, vehicles or suspicious objects across all of the iCVRs
on your network. As you select criteria for your search they are added to the
Search Summary, which displays on the right side of the screen.

The results of your search display at the bottom of the screen, and can be viewed
in thumbnail or list format.

Building a Video Search

1. Click the

Search

button on the View toolbar.

2. Use the

Search Scope

drop-down menu to select the type of recorded video

you want to search:



Rule Violations

- Searches only (high quality) video that was recorded as

a result of a defined rule being violated.



All Video

- Searches only (low quality) video that was recorded

continuously.



Archived Rule Violations

- Searches only (high quality) video that was

archived from the iCVRs and was recorded as a result of a rule violation.



All Archived Video

- Searches only (low quality) video that was archived

from the iCVRs.

3. Select the iCVR(s) from the camera tree and click the

Add Camera(s) to

Search

button to add it to the Search Summary list. Alternatively you can

double-click on the camera to add it.

You can include an unlimited number of cameras in a search.

Summary of Contents for ICVR











































































































































































Search results

Summary of Contents for ICVR

Reviews:

Related manuals for ICVR

Brands by name

Popular brands

VideoIQ ICVR, User Manual

Search results

Summary of Contents for ICVR

Reviews:

Related manuals for ICVR

Brands by name

Popular brands