Installing the iCVR Encoder
12
the Encoder serial connector, and the R+ and R- cables from the camera
should connect to the T+ and T- slots.
3. For a half-duplex camera, connect the R+ and R- cables from the camera
to the T+ and T- slots on the Encoder.
Once the camera has been connected to the Encoder see
Configuring Encoder
Settings
on page 43 to use the View software features.
Note:
The Encoder supports only Pelco P and Pelco D PTZ cameras.
Summary of Contents for ICVR
Page 1: ...VideoIQ User Guide Release 3 0 ...
Page 5: ......
