VideoIQ ICVR User Manual Download Page 78

Page: 78 / 170

Administering Cameras

Configuring D1 Advanced Video Settings

When the Configure Camera window opens, click

Video

, then click the

Advanced

Video Settings

tab.

Note:

The settings on this page should only be configured by an advanced user.

Gain Mode

: This function sets the gain level for the video picture.



Auto Gain Control-

Use the drop-down menu to select a pre-determined

gain level for the video picture.



Manual Gain Control

- Use the slider to specify more or less camera

output for a fixed light environment.

Auto Iris Type:



Manual

- Used for manual iris lenses or to keep the iris fully open.



- Allows the sensor to automatically open or close the iris to

compensate for the change in lighting conditions.

Auto Iris DC Gain:

Adjusts the iris control gain when using a DC iris.

Auto Iris Threshold:

Sets the exposure system gain value (in dB) at which the

electronic iris control ends and auto-iris control begins.

Summary of Contents for ICVR











































































































































































Search results

Summary of Contents for ICVR

Reviews:

Related manuals for ICVR

Brands by name

Popular brands

VideoIQ ICVR, User Manual

Search results

Summary of Contents for ICVR

Reviews:

Related manuals for ICVR

Brands by name

Popular brands