VideoIQ ICVR User Manual Download Page 30

Page: 30 / 170

VideoIQ User Guide

Adjusting and Focusing the Camera

1. Remove the dome cover from the camera.

2. Move the lens into the desired postion by loosening set screw A, adjusting the

pan rotation ring (A), then tightening the set screw.

3. Loosen set screw B on either side of the gimbal assembly, tilt the lens to the

desired position (B), then tighten the set screws.

4. If the image is inverted or not completely aligned, adjust the horizontal rotation

ring (C).

5. Zoom to the desired field of view by loosening the outermost set screw on the

lens, adjusting the zoom, then tightening the set screw.

6. Focus the lens by loosening the screw on the focus ring; adjusting the focus,

then tightening the screw.

Summary of Contents for ICVR











































































































































































Search results

Summary of Contents for ICVR

Reviews:

Related manuals for ICVR

Brands by name

Popular brands

VideoIQ ICVR, User Manual

Search results

Summary of Contents for ICVR

Reviews:

Related manuals for ICVR

Brands by name

Popular brands