VideoIQ ICVR User Manual Download Page 148

Page: 148 / 170

VideoIQ User Guide

138

4. Enter your username and password, then click the

Login

button.

Note:

Logging into a camera via a browser does not count towards the total
number of connections on the camera.

Viewing Live Video

View live video from the camera by clicking the

Live Video

button on the VideoIQ

toolbar. Colored bounding boxes indicating different types of objects will display
on the live video.

VideoIQ Toolbar

- Use the entries in the VideoIQ Toolbar to select which page to

display.

Status Bar

- The status bar displays the name of the camera logged into, the

name of the user who is currently logged in, and the status of audio streaming.

Alarm I/O Toolbar -

When enabled, this toolbar displays on each page of the

browser. If an alarm input is triggered, the alarm light changes from green to red
and a sound is played on your computer.

When there is an audio speaker attached to the iCVR, and a microphone attached
to your PC, click on the

Talk

button to respond immediately to a security breach.

The audio output will be open for as long as the

Talk

button is held down.

Summary of Contents for ICVR











































































































































































Search results

Summary of Contents for ICVR

Reviews:

Related manuals for ICVR

Brands by name

Popular brands

VideoIQ ICVR, User Manual

Search results

Summary of Contents for ICVR

Reviews:

Related manuals for ICVR

Brands by name

Popular brands