1
290A Installation Instructions
Unpacking
In the box with the 290A housing you will find a small plastic bag containing:
No.
1.
One large allen key
2.
One small allen key
3.
Two locking screws
4.
Four M8 wall fixings
5.
Four plugs (11x50 mm) for use in solid walls
Fitting the camera inside the housing
Recommendation:
Fit the camera in indoor conditions to prevent the build-up of dust and
moisture inside the housing.
1. Open the housing by releasing the
two clips on the side.
2. Undo the two screws (6) on the
camera mounting board (7). Slide
the board backwards and lift it
out.
3. Refer to the Axis Installation
Guide provided with the Axis
camera for instructions on camera
hardware installation.
1
2
3
4
5
6
7
