05.2020
INSTRUCTION MANUAL
for installation and operation of pellet boiler
CLASSIC 40C
27
PRODUCT FICHE
1. Supplier's name or trademark.
Victoria-05 Ltd.
1B Ivan Momchilov Str.
5100 Gorna Oryahovitsa
Republic of Bulgaria
Phone: +359 618 60200
E-mail:
2. Supplier's model identifier.
Pellet boiler
CLASSIC
40C
3. Energy efficiency class.
А+
4. Rated heat output.
36 kW
5. Energy efficiency index.
122
6. Seasonal space heating energy efficiency.
82%
7. Specific precautions during assembling, installing or maintaining:
•
Pellet boiler must not run without water in the system and the pressure must not fall below 1 bar. Should the system be
alighted without water, pellet boiler can be damaged.
•
Pellet boiler is designed to heat water through automated burn in the combustion chamber of wood pellets with a
diameter of Ø 6 mm.
•
Warranty is voided by unauthorized use of combustible material.
•
The risk that could arise from non-compliance of this instructions manual is a direct contact with electric parts
(internal), contact with fire or hot surfaces.
•
Pellet boiler is equipped with safety components that guarantee lock it automatically in case of failure of any of its
components. Safety components are activated without outside interference.
•
Necessary for the proper operating of the pellet boiler is its proper installation in accordance with the following
instructions.
•
Fire door should not be opened during operation of the pellet boiler. The burning process is automated and does not
require external intervention.
•
Do not allow to burn the pellet boiler if there are cracks in the glass.
•
Under no circumstances should not be allowed penetration of foreign substances in the firebox or hopper.
•
Do not use combustible materials to clean soot in the chimney.
•
Turn off the pellet boiler from the grid-circuit before cleaning or servicing.
•
Use a vacuum cleaner to clean the combustion chamber and pellet fuel hopper only when pellet boiler is cold.
•
Do not use water to clean the internal parts of the pellet boiler.
•
During operation of the pellet boiler must not be allowed to touch a child to its surface as it is hot. Danger of burns!
•
The handle of the pellet boiler warms as much as the front panel, so it must be operated with a heat-resistant glove.
During operation of the pellet boiler flue pipes and fire door are hot.
•
Do not place flammable objects and liquids away from the pellet boiler.
•
Never use flammable liquids to burn the pellet boiler.
•
Do not obstruct fresh air to enter the room where pellet boiler is installed and through the holes on the pellet boiler.
•
Do not soak pellet boiler and do not touch electrical components with wet hands.
•
Do not mount any adapters to flue pipes and chimney.
•
To operate properly and safely, pellet boiler should be installed in a room that is fire-resistant and equipped with
everything needed (electricity, air exchange, vents).
•
The temperature of the room where it is installed the pellet boiler must not be lower than 0˚C.
•
Use appropriate non-freezing additives for water in the system.
•
Make sure the temperature of the return water is not lower than 45˚C.
•
Rating label is placed on the back of the pellet boiler.
•
Keep this instruction manual, warranty card and purchase invoice in good condition, as will be necessary in any
inquiries.
In extinction, doth not burn a pellet boiler again before cleaning the combustion chamber!
Removed pellets from the combustion chamber should not be placed back in the pellet fuel hopper!
Summary of Contents for CLASSIC 40C
Page 1: ...INSTRUCTION MANUAL for installation and operation of pellet boiler CLASSIC 40C...
Page 26: ...05 2020 INSTRUCTION MANUAL for installation and operation of pellet boiler CLASSIC 40C 26...
Page 31: ...05 2020 INSTRUCTION MANUAL for installation and operation of pellet boiler CLASSIC 40C 31...
