Victoria CLASSIC 40C, Instruction Manual

Page: 3 / 32

05.2020 INSTRUCTION MANUAL for installation and operation of pellet boiler CLASSIC 40C
3
1. Introduction.
We congratulate you on the excellent choice!
Do not leave this instruction manual unread. Installation and operation of a pellet boiler associated with various
legal obligations, which are explained in this instruction manual. According to the laws and regulations for safe use of
appliances of this class, the purchaser and user of the pellet boiler undertake using this instruction manual to inform
themselves for the assembling and the right operation of the appliance.
This instruction manual is provided to assist you and the team that will install, put into operation and service pellet boiler.
Technicians, who will carry out the above activities to the pellet boiler, must be trained and competent.
Pellet boiler is operated only by adult persons familiar with the instruction manual. Pellet boiler is not intended for use by
persons with limited physical, sensory or mental abilities or lack of experience and knowledge, unless they are instructed and
supervised in the use of the appliance by a person responsible for their safety.
Pellet boiler is manufactured and tested in accordance with standards EN 303-5: 2012, EN 60335-1, EN 60335-2-102, EN 55014-
1, EN 61000-6-3 and meets the approved technical documentation.
Failure to follow the instructions described in this manual can lead to damage and consequences for which the manufacturer is
not responsible.
2.Safety Information.
• Pellet boiler must not run without water in the system and the pressure must not fall below 1 bar. If the system is used
without water, pellet boiler can be damaged.
• Pellet boiler is designed to heat water through automated burn in the combustion chamber of wood pellets with a
diameter of Ø 6 mm
class A1
.
• Warranty is voided by unauthorized use of combustible material.
• The risk that could arise from non-compliance of this instructions manual is a direct contact with electric parts
(internal), contact with fire or hot surfaces.
• Pellet boiler is equipped with safety components that guarantee automatically shut down in case of failure of any of its
components. Safety components are activated without outside interference.
• Necessary for the proper operating of the pellet boiler is its proper installation in accordance with the following
instructions.
• Fire door should not be opened during operation of the pellet boiler. The burning process is automated and does not
require external intervention.
• It is not allowed to burn the pellet boiler if there are cracks in the glass.
• Under no circumstances should not be allowed any penetration of foreign substances in the firebox or hopper.
• Do not use combustible materials to clean soot in the chimney.
• Turn off the pellet boiler from the grid-circuit before cleaning or servicing.
• Use a vacuum cleaner to clean the combustion chamber and pellet fuel hopper only when pellet boiler is cold.
• Do not use water to clean the internal parts of the pellet boiler.
• ATTENTION! During operation of the pellet boiler it is not allowed to touch its surface especially by a child as it is hot.
Danger of burning!
• The handle of the pellet boiler warms as much as the front panel, so it must be operated with a heat-resistant glove.

During operation of the pellet boiler flue pipes and fire door are hot.
• Do not place flammable objects and liquids near the pellet boiler.
• NEVER use flammable liquids to start the pellet boiler.
• Do not obstruct fresh air to enter the room where the pellet boiler is installed and the holes on the pellet boiler.
• Do not soak pellet boiler and do not touch electrical components with wet hands.
• Do not mount any adapters to flue pipes and chimney.
• To operate properly and safely, pellet boiler should be installed in a room that is fire-resistant and equipped with
everything needed (electricity, air exchange, vents, water supply and drainage).
• The temperature of the room where it is installed the pellet boiler must not be lower than 0˚C.
• Use appropriate non-freezing additives for water in the system.
• Make sure the temperature of the return water is not lower than 45˚C.
• Rating label is placed on the back of the pellet boiler.