Victoria CLASSIC 40C, Instruction Manual

Page: 16 / 32

05.2020 INSTRUCTION MANUAL for installation and operation of pellet boiler CLASSIC 40C
16
Information.
In the Information Section one can supervise the
operation of the sensors, to check the operation
mode, etc.
Smoke Gases indicates the Chamber Temperature.

Water Heater indicates the Water-heater
Water Temperature.

Indoor Temperature indicates the
temperature in the room.

Flow indicates the pressure, measured at
the air fan input. This is measured in
Pa(pascals).

Fan Speed indicates the turns of the
Smoke Fan. This is measured in revolts per
minute.

Fan Power indicates the power, set for the
particular mode. This is measured in
percentage.
Clock
Date end time
Timer Setting
Here one can switch
among three options.
The first one is “Switch
the Timer ON”. If set
active, the fireplace
would automatically
transfer to “Timer”
Mode.
The second one is
“Delayed Start”. To set
this one active, it is
important that the
“Switch the Timer ON”
shall not be active. The
delayed start is an
autonomous one-time
timer, which one can set
a particular date and
hour on, to start the
fireplace.
Its effect is a
one-time individual one!
“Hour/ Date”.
There are 24 tick-boxes for the hours from 0 to 23. There are seven days from Monday to Sunday.
Say, we’d like to set the fireplace to start on Monday at 10am and to stop at 12 noon. To then restart at 5pm and to
stop at 9 pm.
How shall we do this?
The hour tickboxes from 0 to 9 should be left empty (non-ticked).
Meaning that through the hours from 00:00 to 09:00 it will not operate.
The boxes 10 and 11 should be ticked.
Meaning that through the hours from 10:00 to 12:00 it will operate.