Victoria CLASSIC 40C, Instruction Manual

Page: 15 / 32

05.2020 INSTRUCTION MANUAL for installation and operation of pellet boiler CLASSIC 40C
15
Here one can change the operation mode of the
Smoke Fan. Should one chose Turns, then the fan
would transfer to Set the Power Mode. Should one
chose Flow, then the Fan would transfer to Flow
Supervise Mode.

Operation Mode.
Via this parameter we can change the operation
mode of the control unit.
One can opt between two modes:
- Heating
- Operation with buffer/ bumper. In this mode,
there is an additional setting in Service Technician.
Where one can set the Upper Buffer/ Bumper
Sensor and the Lower Buffer/ Bumper Sensor
operation temperature.

Тhermostat.
The Indoor Sensor can be either switched on or off.
Note:
It is possible that this setting is preset as active and
not possible to change through the display.

Internet.
Here one can check if there is an WIFI Module
connected to the system.
The IP address, one should connect to, to
introduce the necessary settings.
ID number of the device.
Status, displays if the WIFI Module is connected.

0 no module

1 a module is present, but is not
connected

2 a module is connected to the
router.

Languages.
Here there is a Control Unit Language shortcut key.
The system offers four languages: English,
Bulgarian, Dutch, and German.