Vertiv
|
NetSure 710 Series Installation Manual (IM581127000)
|
Rev. U
33
corresponding sockets on the distribution panel. Ensure the alarm contact on the back of the circuit
breaker makes contact with the alarm terminal on the spring strip. Push distribution device in firmly
until fully seated in the distribution panel.
3.
Record all circuit breaker sizes on the label provided on the shield.
4.
Close the distribution cabinet's front door. Turn the latch clockwise to secure the door.
Figure 13:
Installing a Bullet Nose Type Circuit Breaker
Insert these terminals
into corresponding sockets
on distribution panel.
Longer Side
to the Bottom
Shorter Side
to the To
p
Lettering on
handle must be
right side up.
Turn off
before installing.
