Vertiv
|
NetSure 710 Series Installation Manual (IM581127000)
|
Rev. U
52
MAKING ELECTRICAL CONNECTIONS
Important Safety Instructions
DANGER!
Adhere to the “Important Safety Instructions” presented at the front of this document.
Wiring Considerations
All wiring and branch circuit protection should follow the current edition of the American National Standards
Institute (ANSI) approved National Fire Protection Association’s (NFPA) National Electrical Code (NEC), and
applicable local codes. For operation in countries where the NEC is not recognized, follow applicable codes.
For wire size, branch circuit protection, crimp lug, and general wiring recommendations; refer to System
Application Guide SAG581127000 and Power Data Sheet PD588705200 (PD588705201, PD58870520102,
PD58870520103, PD58870520104).
Lugs should be crimped per lug manufacturer’s specifications.
for supplemental lug crimping information when using the special application crimp lug / strap
combination.
Table 4:
Supplemental Lug Crimping Information when using the Special Application Crimp Lug / Strap
Combination
Crimp Lug Part No.
Crimp Tool Required
1
,
T&B Model TBM12 or TBM15
Hydraulic Heads
Color Key
Die Index/
Code No.
Die Cat.
Number
245393500
Burndy:
YA25L-4TCG1
Pink
42H
15508
245393600
Burndy:
YA26L-4TCG1
Black
45
15526
245393700
Burndy:
YA27L-4TCG1
Orange
50
15530
245393800
Burndy:
YA28L-4TCG1 Purple
54H
15511
514872
T & B:
256-30695-
1879
Yellow
62
15510
Burndy:
YA29L-4TCG1
514873
T & B:
256-30695-
1880
Red
71
15514
Burndy:
YA31L-4TCG1
1
The lugs should be crimped to the specifications given in the
manufacturer’s instructions furnished with the crimp tool or lug.
