Vertiv™ XTE 601E Series Equipment Enclosures Description and Installation Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
59
Table 13.1
Supported NiCd Batteries (F2019015, F2019016)
Battery
Amp Hours
per String @ 8 hrs
Dimensions (inches)
H x W x D
SAFT Tel.X+180
180 Ah
10.0 x 20.7 x 25.9 (overall)
13.4
Battery Installation and Connection
CAUTION!
PROVIDE MOST STABLE LOADING
If only one (1) battery string is installed, install batteries in the bottom battery box. If two (2) battery strings are installed,
install batteries in the bottom two battery boxes.
NOTE!
The enclosure is not shipped with batteries installed. The batteries are to be installed in the field.
ENCLOSURE IS PRE-WIRED FOR -48 VDC BATTERY INSTALLATION ONLY.
The enclosure includes two (2) battery boxes. Each battery box holds one (1) -48 VDC string of NiCd batteries. Cabling in the
enclosure is provided and pre-wired for two (2) -48 VDC battery strings only.
NOTE!
Battery cables may be connected to the busbars in the DC power plant as shipped to site. If less than two (2) battery
strings to be used, unused battery cables should be disconnected from the power system to avoid an electrical hazard.
DANGER!
ELECTRICAL HAZARD. Risk of serious injury and/or equipment damage.
Exercise extreme care when handling the batteries and connecting them to the string. Two people are recommended for
lifting and placing batteries. Wear heavy gloves and safety glasses while lifting the batteries. Handle each battery ONLY by
its lifting slot. Keep hands well away from the connector posts.
Arcing is possible during battery connection procedures. Use heavy gloves during all procedures involving the batteries to
avoid potential injury. Do not wear rings, metallic wrist bands or bracelets when working on batteries. Do not allow metal
objects to rest on the batteries or to fall across the terminals.
Make sure the battery disconnect breakers are set to “OFF”.
Refer to:
•
The schematic drawings shipped with your enclosure for a wiring diagram.
•
The battery vendor’s documentation set for installation and testing instructions of the string.
Follow all safety precautions and notices as listed in the battery vendors documentation set.
Perform one of the following procedures to install SAFT NiCd batteries into the lower enclosure battery box. Repeat the steps for
other battery boxes.
