Vertiv™ XTE 601E Series Equipment Enclosures Description and Installation Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
25
•
Torque wrench, 1/2" drive, recommended
•
Ratchet, 1/2" drive, 3/8" drive and 1/4" drive
•
Socket, 3/4" deep, 1/2" drive
•
Socket set, range from 1/4” to 1"
•
3" and 6" extensions, 1/2" drive
•
5/16" and 7/16" ratchet wrench
•
36" carpenter’s level
•
Lineman’s scissors
•
Lineman’s strippers
•
Lineman’s cutters
•
Crimping tool with dies from #6 AWG to #2 AWG
•
Electrician’s insulated screwdrivers, Phillips, No. 1 and 2
•
Electrician’s insulated screwdrivers, flat-blade, small and large
•
Insulated 3/8”, M6, M8, M10 nut drivers for battery installation.
•
Silicone sealant
•
NO-OX-ID-A or approved equivalent
Outside the scope of this document, are the tools to fish, splice and terminate OSP Cables and laptop to setup the power system
controller.
Equipment associated with lifting the enclosure by the eyebolts is listed separately, in a subsequent section.
