Vertiv™ XTE 601E Series Equipment Enclosures Description and Installation Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
13
•
Over and Under Temperature Conditions.
•
Primary Equipment Compartment Intrusion.
•
Fan Control Logic: The ECU controls provide independent control of the internal and external HX fans, adapting to the
environment and equipment loads, and responding to faults, intrusions, etc. This complex control enables the enclosure to
achieve the low acoustic profile and maintain the equipment under proper operating conditions in accordance with the
requirements of the carrier.
NOTE!
The fan logic is built around equipment designed for operation at 65 °C. Equipment rated to lower than a 65 °C
upper limit may still be deployed within the enclosure with careful component placement. Alternatively, the fan logic may be
changed -- consult Vertiv Engineering for more details.
Climate Control (F2019016)
Air Conditioner:
The F2019016 enclosure's primary equipment compartment has a front door mounted 4kW DC air conditioner.
The DC air conditioner has a 900 W heater built-in. It has default control set points for heating and cooling (cool/heat settings
are customer requirements). It has a remote temperature sensor placed within the enclosure. It has an internal fan that is always
“on”, circulating air. It also displays sensed temperature on a front LED display.
Acoustic Performance:
The enclosure employs passive and active features, such as adaptive fan control and acoustic dampening, to
manage and minimize acoustic noise.
Mounting Accessories:
See Table 18.1 for template ordering information.
•
A rubber barrier pad is included to prevent corrosion between the concrete pad and the enclosure mounting surfaces, P/N
145396. See Figure 2.6.
•
An optional re-usable pad mounting drill template kit is available for marking hole locations to drill holes and set anchors, P/N
F1010584 (145344). See Figure 2.7.
•
An optional pour-in-place pad template kit is available, P/N F1010585 (554917). See Figure 2.8.
•
Optional 6" pad-mount plinth (F1010948) is available to space enclosures off the ground in areas with flooding or drifting
snow.
