Vermeer McLaughlin V25 Page 16 Operator And Maintenance Manual Download

Page: 16 / 182

viii

V25/VX30G/VSK25/VSK30G Vacuum Excavators

Trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-10
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-11

Transporting/Storing Machine in Freezing Conditions . . . 30-12

Preparing Machine and Work Area. . . . . . . . . . . . . . . . . . . 40-1

Operator Qualifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40-1
Personal Protective Equipment  . . . . . . . . . . . . . . . . . . . . .  40-2
Sound Levels  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40-4
Prepare the Area  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40-4

Locate Buried Utilities  . . . . . . . . . . . . . . . . . . . . . . . . . .  40-5
Striking a Utility  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40-7
Electrocution Prevention . . . . . . . . . . . . . . . . . . . . . . . .  40-9
Jobsite Assessment. . . . . . . . . . . . . . . . . . . . . . . . . . .  40-12

Prepare the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-14

Engine Fluids - Check . . . . . . . . . . . . . . . . . . . . . . . . .  40-14
Water Pump & Blower Oil Level - Check . . . . . . . . . . .  40-15
Fresh Water Tank(s) - Fill  . . . . . . . . . . . . . . . . . . . . . .  40-16
Water Strainer - Clean . . . . . . . . . . . . . . . . . . . . . . . . .  40-17
Vacuum Hoses and Tools - Check  . . . . . . . . . . . . . . .  40-17
Filters - Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40-17

Machine Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-17

Operating the Vacuum Excavator. . . . . . . . . . . . . . . . . . . . 50-1

Cold Weather Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 50-1
Operating Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-1

Water Tank Low Level Sensor  . . . . . . . . . . . . . . . . . . .  50-1
Spoil Tank Level Float Switch . . . . . . . . . . . . . . . . . . . .  50-1
Pressure Relief Valve  . . . . . . . . . . . . . . . . . . . . . . . . . .  50-2
Vacuum Relief Valve . . . . . . . . . . . . . . . . . . . . . . . . . . .  50-2

Vacuum Hoses and Tooling - Connect . . . . . . . . . . . . . . . . 50-3

Potholing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-3

Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-4

Operating Precautions  . . . . . . . . . . . . . . . . . . . . . . . . .  50-5
Material Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50-6
Operation - Potholing  . . . . . . . . . . . . . . . . . . . . . . . . . .  50-6
Operation - Vacuum Excavation . . . . . . . . . . . . . . . . .  50-10
Reverse Flow (Option)  . . . . . . . . . . . . . . . . . . . . . . . .  50-12
Strong Arm Attachment (Option). . . . . . . . . . . . . . . . .  50-14

Dumping Spoil Tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-15

Manual Locking Door (VSK25-100G Only) . . . . . . . . . 50-15
Hydraulic Locking Door (All Except VSK25-100G) . . . 50-19

Machine - Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50-22

Spoil Tank - Clean  . . . . . . . . . . . . . . . . . . . . . . . . . . .  50-22
Cyclone Separator Housing - Clean . . . . . . . . . . . . . .  50-24
Tools and Hoses - Clean. . . . . . . . . . . . . . . . . . . . . . .  50-25
Vacuum Gauge - Reset  . . . . . . . . . . . . . . . . . . . . . . .  50-26

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-1

Maintenance - 10 Service Hours or Daily . . . . . . . . . . . . . 65-1

Engine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65-1

Engine Maintenance - Honda . . . . . . . . . . . . . . . . . . . . 65-1
Engine Maintenance - Briggs & Stratton Vanguard . . . 65-2

Brake System - Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65-2

Summary of Contents for McLaughlin V25























































































































































































Search results

Summary of Contents for McLaughlin V25

Reviews:

Related manuals for McLaughlin V25

Brands by name

Popular brands

Vermeer McLaughlin V25, Operator And Maintenance Manual

Search results

Summary of Contents for McLaughlin V25

Reviews:

Related manuals for McLaughlin V25

Brands by name

Popular brands