Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 100 / 182

50-18 Operating the Vacuum Excavator V25/VX30G/VSK25/VSK30G Vacuum Excavators
Step 9: With the Vacuum Relief Valve whistling, the door can be unlocked. Turn door
handle
(6) counterclockwise until fully loose.
Step 10: Return to operator console, and turn off engine. Remove ignition key. Keep all
personnel clear of the rear of the machine.
Step 11: Wait for vacuum to drop. As vacuum drops, the door will release, allowing the
spoil to dump from the tank.
Material in spoil tank is very heavy. Stay clear of
the door.
Step 12: Once tank has been emptied, it may be cleaned. If not cleaning machine after
dumping, wipe the door seal and mating flange clean to avoid damaging the
seal when closing and locking the door.
Step 13: Open cyclonic separation door (7), and remove debris. Close door.
Step 14: Check air filter. Open air cleaner door (8) and inspect air filter element. If
dirty, remove element and clean with low-pressure water. The spray wand (9)
may be used. Install element after it has dried.
Clean air filter element at least once daily. Replace damaged air filter
elements immediately.
NOTICE: Do not operate unit without the air filter installed. Blower damage will result.
Step 15: Close and lock spoil tank door.
Step 16: Securely store all tools and hoses before leaving the spoil disposal site.
6
7
8
6
9