Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 158 / 182

120-2 Maintenance - As Required V25/VX30G/VSK25/VSK30G Vacuum Excavators
Step 1: Remove negative (-) cable (1) . Then remove positive (+) cable (2) .
Step 2: Loosen nuts (3) and remove hold-down bracket (4) .
Step 3: Remove battery.
Step 4: Apply a light coating of petroleum jelly around the base of each terminal of
the new, fully charged battery.
Step 5: Install the new battery and the hold-down bracket.
Step 6: Install positive (+) cable and red cover (2) ; then install negative (-) cable and
black cover (1) .
N
OZZLES
- I
NSPECT
/C
LEAN
/R
EPLACE
Inspect nozzles on all water tools. Replace damaged nozzles. Always replace a nozzle
with a nozzle of the same type and orifice size. Consult
Parts Manual for replacement
part number .
(1) Nozzle
To inspect/clean/replace:
Step 1: Remove nozzle.
Step 2: Blow out nozzle.
Step 3: Replace or reinstall nozzle in each tool as needed.
3
2
4
1
1