Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 164 / 182

120-8 Maintenance - As Required V25/VX30G/VSK25/VSK30G Vacuum Excavators
S
TORAGE
Preparing for Storage
• Park machine on level ground and chock the wheels. Use the jack to support the tongue. If possible, store
machine in a dry, protected place.
• Clean all mud, dirt, grease, and other foreign material from the machine. To inhibit rusting, repaint areas
with missing paint.
• Repair or replace any worn or damaged parts and decals. Refer to the Parts Manual for ordering
replacements.
• Refer to the Engine Operation Manual supplied with machine for engine storage instructions.
• Refer to the Blower Operation Manual supplied with machine for blower storage instructions.
• Refer to the Pump Operation Manual supplied with machine for water pump storage instructions.
• Remove battery and store inside where the temperature will not drop below 32°F (0°C). Check fluid level
and charge fully. Check battery every 30 days and charge if necessary.
• Lubricate all grease points on the machine.
• Do not subject units to excessive vibration during storage.
• If stored outdoors, provide coverage such as a tarpaulin or lean-to.
• Do not leave belts fully tensioned.
Storing Machine in Freezing Conditions
Refer to “Transporting or Storing Machine in Freezing Conditions,” page 30-12 , for procedure.