Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 106 / 182

50-24 Operating the Vacuum Excavator V25/VX30G/VSK25/VSK30G Vacuum Excavators
Step 10: (Option) Open Tank Cleanout valve (8) to turn on automatic tank cleanout
system. Material will be washed out of spoil tank. Close Tank Cleanout valve
when tank is clean.
Step 11: Close Hose Reel ball valve. Turn Water Pump Switch OFF.
Step 12: Squeeze spray wand trigger to release water pressure from water hose.
Step 13: Remove and store safety bar and safety lock pin.
Step 14: Lower spoil tank. Close and lock spoil tank door. Lower engine speed to idle.
Step 15: Follow the Shutdown Procedure , page 23-1 , and remove ignition key.
Step 16: Clean Cyclone Separator as directed in the following section.
Step 17: Clean tools and hoses as directed in “Tools and Hoses - Clean,” page 50-25 .
Step 18: Securely store all tools and hoses prior to departing.
Cyclone Separator Housing - Clean
Open and clean cyclone separator housing (1) after dumping the spoil tank. Wipe
housing clean with a towel. Do not spray water into the housing while the engine is
running.
8
1