Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 134 / 182

80-4 Maintenance - 100 Service Hours or Monthly V25/VX30G/VSK25/VSK30G Vacuum Excavators
Safety Signs - Maintain
Safety signs and decals located on your machine contain important and useful information that will help you
operate your equipment safely and correctly. Refer to the
Parts Manual for locations.
To assure that all safety signs and decals remain in place and in good condition, follow these instructions:
• Keep all safety signs clean. Use soap and water - not mineral spirits, abrasive cleaners, or other similar
cleaners that will damage the sign.
• Replace any damaged or missing safety signs. When attaching signs, the temperature of the mounting
surface must be at least 40°F (5°C). The mounting surface must be clean and dry.
• When replacing a machine component with a safety sign attached, replace the safety sign also.
Replacement signs can be purchased from your Vermeer dealer.
A
MBER
B
EACON
- C
HECK
Check that amber beacon flashes when engine ignition key is on. If beacon does not function properly, contact
your Vermeer dealer.