Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 46 / 182

22-2 Starting Procedure V25/VX30G/VSK25/VSK30G Vacuum Excavators
NOTICE: Leave choke control pushed in (open) when restarting a warm engine.
Step 4: Turn ignition key fully clockwise to start engine. Release key once engine starts.
Step 5: Allow engine to warm up for 3–5 minutes before operating machine. Gradually push choke control in
to open position as engine warms up.
NOTICE: If engine fails to start after 5 seconds, release ignition switch. Wait one minute before operating the
starter again.
C
OLD
W
EATHER
S
TARTING
Before operating in cold weather (below 32°F (0°C)), refer to the Engine Operation Manual for recommended engine oil, fuel,
and starting procedures. Let engine run 2–3 minutes before gradually releasing the choke. Do not use aerosol starting fluids.