Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 6 / 182

Introduction V25/VX30G/VSK25/VSK30G Vacuum Excavators
(12) Depreciation damage caused by normal wear, lack of reasonable and proper maintenance, failure to follow operating
instructions, misuse, lack of proper protection during storage is not covered by this Limited Warranty.
(13) Accessory systems and electronics not of McLaughlin’s manufacture are warranted only to the extent of such manufacturer’s
respective Limited Warranty, if any.
(14) Down hole toolage is not covered under this Limited Warranty.
(15) Wear items which are listed by product group below are not covered by this Limited Warranty:
CORE SAWS:
Slides, rollers, filters, water seal/skirt, tooling and tires.
PIERCING TOOLS:
Wear ring, bushings, hoses (internal and external), couplers, tail bolts, control cam, springs, wear face, anvil nut, e-clip, head lip seal.
VACUUM EXCAVATORS:
Belts after 50 hours, filters, tires, brakes, unloader valve after 250 hours, nozzles, suction hoses including camlocks, gate valves,
camlocks, quick disconnects, water pump internal parts, deflector inside spoil tank, sight glass on spoil door, spoil tank door seal,
boom tooling, boom hose, boom snout, boom shut off seal, boom packing gland, suction tooling. For vacuum excavators mounted to a
truck, the truck’s Limited Warranty and support are the responsibility of the respective truck manufacturer.
PARTS WARRANTY: Parts replaced in the warranty period will receive the balance of the first year New Industrial Equipment
Limited Warranty, during the first twelve (12) months or 1000 hours, whichever comes first. Replacement parts after the original
machine warranty, are warranted to be free from defects of material for ninety (90) days or the part will be repaired or replaced,
without labor coverage for removal and reinstallation.