Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 109 / 182

V25/VX30G/VSK25/VSK30G Vacuum Excavators Maintenance 60-1
Section 60: Maintenance
Visually inspect machine daily before starting the machine.
Make no modifications to your equipment unless specifically recommended or requested by Vermeer
Corporation.
Maintenance intervals are included for reference only. Before performing any maintenance, refer to the
following sections for safety guidelines and correct procedures. Make no modifications to your equipment unless
specifically recommended by McLaughlin Group, Inc.
• The maintenance sections of this
Operator’s and Maintenance Manual
contain maintenance instructions for
the machine. Do not attempt any maintenance procedure that is not fully understood, or that cannot be
safely and accurately performed with the available tools and equipment.
• If an issue is encountered that is not understood or cannot be solved, contact your authorized independent
Vermeer dealer.
• To provide a better view, some photographs or illustrations in the maintenance sections may show the
machine shields removed.
Never operate the machine with the shields removed - keep all shields
in place. If removing a shield is necessary, return it to its operating position before operating the machine.
WARNING: Failure to use shutdown procedure can result in unexpected hazard(s). Death or
serious injury could result due to entanglement, crushing, cutting, or other hazardous
contact. Follow Shutdown Procedure after operating, before performing any service or
maintenance, and before transporting. Refer to
Shutdown Procedure , page 23-1.