Vermeer McLaughlin V25, Operator And Maintenance Manual

Page: 81 / 182

V25/VX30G/VSK25/VSK30G Vacuum Excavators Preparing Machine and Work Area 40-17
Water Strainer - Clean
Clean water strainer daily before starting the machine, or
during operation if water flow becomes restricted.
Step 1: Close Water Supply valve (1) .
Step 2: Remove plug-and-cap fitting (2) from strainer
housing.
Step 3: Remove and clean screen (3) by flushing with
water.
Step 4: Install screen and fitting.
Step 5: Open Water Supply valve.
Vacuum Hoses and Tools - Check
Check all vacuum hoses and tools for blockages and damage. Ensure nozzles are clean, free of clogs, and work
properly. Replace nozzles as necessary. Check fittings and condition of hoses. Tighten or replace as necessary.
Replace broken and worn tools.
Filters - Check
Check all filters. Clean or replace filters as necessary.
M
ACHINE
L
OCATION
• Locate machine on stable, level ground.
• Position machine as close to the area to be excavated as possible.
• Set towing vehicle park brake and chock wheels.
3
2
1