3. Tap
Start Test
. The V-Perf Test page will open up, displaying the Results window/gauge.
B.3.2 Running a Quick V-Perf Test to a V-Probe
The Quick V-Perf test is a fully automated V-Perf test that works with the V-Probe. When configured on the same subnet, the V-
Probe is discovered automatically by the test set. As soon as V-Probe is discovered, the V-Perf WiFi Throughput test is
automatically launched. The V-Perf test results can be saved automatically at the end of the test.
Note:
Before running V-Perf, make sure that the V-Probe is connected to a Wi-Fi router and has an assigned DHCP IP address.
1. Connect the test set to the Access Point under test from the AP Scan table accessed from the
AP Scan
icon on the home
menu. Refer to
for more information on connecting to an Access Point.
Default parameters can be modified under V-Perf from the main menu to run a longer test. This may be desirable if
observing the gauge to troubleshoot problems live during walkthroughs of the premise.
2. After
successful authentication and association
, tap on
Quick V-Perf
to start the Automated V-Perf Discovery/Test
Application. It will Auto-Discover the connected V-Probe in the network and start the test with default settings, whether
running the test over WiFi or copper.
B.4 V-Probe Configuration
WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00
