VeEX MTTplus-900 User Manual Download Page 83

Page: 83 / 99

12.0 Ethernet Setup

Ethernet Setup screen

Setup

The following port and test interface settings are available when 10/100/1000T or 1000X are selected in the

Port

field:

Profile:

Save the setup and measurements in a new test profile or recalls an existing test profile. The

Default

test profile

brings back the Air Expert’s default test settings. The

Last configuration

profile is used at boot up.

Port:

From the drop-down menu, select the test mode. The module can be configured for WiFi utilization, Ethernet Copper

port 10/100/1000T, or Ethernet Fiber port 1000X/100FX utilization.

Auto Negotiation:

Off

. Matches the test set's negotiation settings to those of the link partner.

Speed

(only when Auto Negotiation is Off): 10 Mbps, 100 Mbps.

Duplex

(only when Auto Negotiation is Off): Half or Full.

Advertisement

(only when Auto Negotiation is On): Default-All or Custom. Custom options include 10/100/1000M

Half or 10/100/1000M Full.

Press

Apply

when finished to apply setup configurations.

Go back to top

Go back to TOC

WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00

Summary of Contents for MTTplus-900




































































































Search results

Summary of Contents for MTTplus-900

Reviews:

Related manuals for MTTplus-900

Brands by name

Popular brands

VeEX MTTplus-900, User Manual

Search results

Summary of Contents for MTTplus-900

Reviews:

Related manuals for MTTplus-900

Brands by name

Popular brands